Restoring default config on iPhone MobileTerminal.

I see this issue/question posted quite a bit, and after helping several people on various forums… I thought this might help others too.

If you’ve used MobileTerminal on your jailbroken iPhone, then you should be aware of the customization possible. More specifically: customization relating to the command shortcut menu. While customizing this and other menus, it’s very easy to accidentally wipe out an entire submenu! The best example I can think of would be picking say the “ls” submenu, and then accidentally hitting off on the submenu instead of the right arrow to modify it.

Another common menu to wipe out is the “misc” menu. Never fear though, you can still access the configuration menu by taping the AT&T or iPod logo in the upper left corner.

See the below screen shot if I was confusing:

At this time, MobileTerminal doesn’t have a graphical method to restore defaults. The quickest way out of this mess is to open MobileTerminal and issue the following command:

rm -rf /private/var/mobile/Library/Preferences/com.googlecode.mobileterminal.* The case is sensitive, so type that in exactly as posted.

Restart MobileTerminal and you should be good to go. Consequently, that’s what you’d also want to backup if you were about to blow away your iPhone and wanted to keep your tricked out MobileTerminal preferences.

Till next time…

Part 2: Where’d my IO go?

Shortly after upgrading my Hackintosh to 10.5.6 it occured to me that the machine was NOTABLY slower. Digging into it a little bit more I discovered it was all IO wait issues (read: poor disk performance). We’re talking like 5 minute boots and fun stuff like that.

I opened up System Profiler, and to my surprise there were no longer any SATA devices (T43 is a SATA based machine, at least mine is). The hard drive was now nested in the ATA section with the DVD-ROM/CD-RW combo drive. At this point I suspected driver schnanigans so I then dumped dmesg to a text file and put it on a usb keychain for some comparisons.

Once again I imaged the machine and then restored the old 10.5.3 image and compared dmesg. The old 10.5.3 (which FLEW compared to my 10.5.6 image) was using AppleIntelPIIXATA.kext and the 10.5.6 image had switched to AppleVIAATA.kext. As I said in part 1, I had to select VIA-SB to even get OSX to install on this machine… so I guess this makes sense. I haven’t had time to boot the install DVD again to see if PIIXATA is an option to choose.

ANYWAY, I found this thread on InsanelyMac which includes the PIIXATA drivers for various OSX builds: AppleIntelPIIXATA kext fully working for all ICHx Mobo (All Sata Channels working), Fully working kext (Leopard & Tiger version 1.1)

I don’t think English is his first language, so let me try to clarify:

• Use OSX86Tools to install the AppleIntelPIIXATA.kext, don’t close the app yet.
• Open terminal and change directory to: /System/Library/Extensions
• mv AppleVIAATA.kext /var/tmp (in case you need it back!).
• Back in OSX86Tools check Set Extensions permissions & Clear Extensions Cache and then Run Selected Items.
• Reboot machine, and you should notice GREATLY improved performance.

If it doesn’t boot again, well don’t blame me 🙂

Till next time…

Part 1: Getting OSX 10.5.6 on my IBM T43 laptop

Over the next few posts I’m going to chronicle my struggles to get OSX 10.5.6 on my test laptop, this is just the first installment.

As I might have posted in the past, I do a bit of testing/development for OSX on a Hackintosh, more specifically using an IBM T43. I’m somewhat ashamed to say that, being that I’m an iPhone/iPod owner (and generally a fan of Apple products). I would love to own a real Apple branded machine, but they’re just not within my budget. Even used mini’s still seem to fetch near MSRP prices on eBay. So please, I really don’t need any lectures.

I started this journey with Kalyway 10.5.1 and over time used their comboupdates to get it to 10.5.3. I’ve been very content for a long time, but lately I needed to do some testing that required 10.5.6.

I imaged the laptop and unsuccessfully tried about 50 different methods to get it to 10.5.4, .5 and .6. Nothing really worked out for me 100%, so I decided to turn to the newer iDeneb releases.

First I acquired the iDeneb 1.4 (10.5.6) DVD ISO, and attempted to install. The DVD boots, installs about 3/4 the way and then dies with this error: pkgExtractor[162]: BomFileError 2: No such file or directory – ./usr/X11/share/doc/renderproto/renderproto.txt. I dicked with this thing for days and on about 7 different machines (not T43’s) and recieved the same results. Either I’m doing something TOTALLY wrong, or this ISO is bunk. I found a few other people who were having the same issues on the InsanelyMac forum, but no fix was ever posted.

Then I acquired the iDeneb 1.3 (10.5.5) DVD ISO, and likewise attempted to install … success! The winning combination to choose at install is:

• X11
• Patches 10.5.5 Ready -> Audio -> AppleAzailiaAudio
• Patches 10.5.5 Ready -> Chipset -> VIA-SB
• Patches 10.5.5 Ready -> Kernel -> Kernel 9.4.0 StageXNU
• Patches 10.5.5 Ready -> Network -> AppleBC5751 (more on this later)

If you’ve never installed OSX on this laptop before, make sure you disable SpeedStep in the BIOS or you’ll be hating life.

At this point you more/less have a working 10.5.5 machine, which is a step in the right direction. Still isn’t 10.5.6 though, so let’s continue on. You’ll notice your video isn’t quite right yet, and maybe some hardware you have isn’t working right either. My suggestion: get it to 10.5.6 and THEN worry about that stuff.

Lucky for us, iDeneb released a 10.5.6 upgrade kit. It can be found here: http://ideneb.net/en/homepage/63-ideneb-upgrade-kit-1056-rev1

Follow the instructions with it and voila, you’ll be at 10.5.6.

Now, to get all of my hardware devices hmmmmmmmmmmmm……….

Till next time…